6-station rotary indexing riveting machine with a 300 mm cam indexer table, ±0.02° repeat accuracy and PLC control. It loads...

Custom-built conveyor systems linking assembly, riveting, clinching and inspection stations into a continuous production line.

Portal and C-frame press structures built for stiffness under load, so tooling alignment holds across the full stroke.

Rotary special purpose welding machine that carries components through indexed torch stations for repeatable, operator-independent welds.

Rotary indexing riveting special purpose machine that carries the component through several stations in one automated cycle.

Inverted riveting special purpose machine, setting rivets from below where the assembly cannot be approached from above.

Custom-engineered riveting machine for components that no standard machine suits — built from your drawing and cycle time.

Crimping machine and tooling producing consistent, gas-tight crimped joints with repeatable compression on every cycle.

Inspection fixtures and relation gauges for quick go/no-go dimensional checks at the point of manufacture.

Component fixtures for riveting machines, locating the part accurately and repeatably beneath the riveting head.

Compressed-air press for pressing, staking, marking and light forming, with fast cycling and low running cost.

Rotary welding special purpose machine automating circumferential and multi-position welding to a fixed, repeatable program.

Riveting machine fixtures are used to position and rotate a fixture to set rivets at specific locations. They can be...

Air pressure decay leak testing machine giving objective, repeatable pass/fail results with no operator judgement involved.

Precision cam indexing drive providing accurate, backlash-free rotary positioning for automated assembly and SPM applications.

Component fixtures for screw driving stations, locating each screw position accurately under the driver.

Automatic screw feeding and driving machine with controlled torque, removing missed and under-torqued screws from assembly.

Welding jigs and fixtures that locate and clamp components accurately and hold them square against weld distortion.

Custom jigs and fixtures for machining, assembly, welding and inspection, engineered around your component drawing.

A welding and robotic fixture is a specialized workholding device that securely holds and precisely positions a workpiece for automated...

A welding and robotic fixture is a specialized workholding device that securely holds and precisely positions a workpiece for automated...

Welding fixtures designed for robotic cells, holding the component to the robot's programmed position with clear torch access.

Manually operated clinching tool for low-volume, prototype and on-site joining. No air or power supply needed at the point of...

Compressed-air rivet press for everyday production riveting, built for long service life with minimal maintenance.

Fastener insertion press for self-clinching nuts, studs and standoffs. Seats PEM-style hardware into sheet metal in one controlled stroke.

Cold-forming clinching machine built for sheet metal fabrication. Joins coated, painted and dissimilar sheet with no heat, no distortion and...

Air-operated clinching press that joins sheet metal without rivets, screws or welding. Runs on shop compressed air, needs no consumables...

A clinching machine uses a punch and die to plastically deform metal sheets, creating an interlocking, permanent joint without the...

C-frame clinching press for production-line rivetless joining. Throat depth and frame built around your component's reach requirement.

Air-over-oil press delivering high force from a standard compressed air supply, with no hydraulic power pack required.

Rotary spin riveting machine that forms the rivet head under spinning pressure, giving a smooth finish and controlled joint tightness.

Compressed-air riveting machine delivering consistent setting force on every stroke. Foot-operated for two-handed part loading.

Air-operated machine offering both orbital and spin head forming, for smooth heads at low forming force.

Purpose-built riveting machine for hinge assembly, forming a captive joint that still swings freely.

Hydro-pneumatic riveting machine using an air-over-oil intensifier to deliver hydraulic-level force from a standard shop air supply.

An automatic riveting machine is an industrial device that semi-automates the process of joining materials with rivets, improving efficiency and...

Hydraulic riveting machine for large-diameter rivets and heavy sections, delivering high force with a controlled, steady stroke.

Twin-head riveting machine that sets two rivets simultaneously in one cycle, halving cycle time on two-rivet components.

Orbital riveting machine forming rivet heads by progressive peening at low force — smooth heads, no shock loading, ideal for...

Riveting machine with automatic rivet feeding, so the operator never handles a loose rivet and the cycle never stops to...

Automated riveting machine with rivet feeding for high-volume production, removing manual rivet placement from the cycle.

Production riveting machine from the VR Automation range, built for consistent repeatable setting on everyday riveting work.

Orbital riveting machine that forms the rivet from underneath, keeping the visible top face of the assembly clean and unmarked.

Riveting machine that sets from beneath the workpiece, so the upper surface of the assembly stays clean and undamaged.