Automatic Screwing Machines
Automatic Screw Driving
Automatic Screwing Machine Manufacturer in India
VR Automation manufactures automatic screwing machines and screwing fixtures that feed, position and drive each screw to a set torque.
Because torque is controlled and verified by the machine rather than judged by feel, the two classic assembly defects disappear: the screw that was never fitted, and the screw that was under- or over-tightened.
2 ModelsAvailable in this range
₹18,000–₹90,000Indicative ex-works
Made in PuneBuilt in-house since 2019
PAN IndiaSupply & service
Machine Features & Types
Automatic Screw Feed
Screws presented automatically so the operator never handles loose hardware.
Torque Control
Each screw driven to a set torque, with the result verified rather than assumed.
Missed-Screw Detection
Count and torque verification prevent an assembly leaving with a screw missing.
Faster Cycles
Considerably quicker than hand driving on multi-screw assemblies.
Screwing Fixtures
Component fixtures that present every screw position correctly to the driver.
Data Output
Torque results available for traceability where the customer requires it.
Our Automatic Screwing Machine Range
2 products in this category. Prices are indicative and ex-works — tooling and component fixture are quoted against your part.
Industries We Serve
Electronics Assembly
Multi-screw housings and PCB mounting with torque-critical joints.
Automotive Interiors
Trim, panel and bracket assembly at volume.
Appliances
Housing and cover assembly with consistent torque.
Electrical Panels
Terminal and component mounting in enclosures.
General Assembly
Any repetitive multi-screw operation.
Plastics
Self-tapping screws into moulded housings where over-torque strips the boss.
Applications & Components
Tooling and fixture are engineered per component. These are the applications we are asked for most often:
Auto feed screwdriverTorque controlled drivingMulti-spindle screwingScrew presentersSelf-tapping screwsMachine screwsScrewing fixturesMissed screw detectionTorque data loggingRobotic screwdrivingInline screw stations
Why Buy From VR Automation
Built to Your Drawing
Tooling and component fixture are engineered around your part, so the machine arrives ready to run rather than needing development on your floor.
Repeatable Output
Force, stroke and cycle are set by the machine, so joint quality stops depending on operator strength or fatigue late in a shift.
Made in India
Locally engineered and locally supported, priced against Indian production cost rather than import landed cost.
Installation & Service
Commissioning, operator training, spares and service support across India, since 2019.
Designed, machined, assembled and tested in-house at our Bhosari, Pune facility. You deal with the engineers who build the machine, not a trading intermediary — which keeps lead times short and spares available for the working life of the machine.
Price & Quotation
Price depends on force, capacity, tooling, automation level and the component fixture, so a catalogue figure would be misleading. We quote against your actual part.
To receive a quotation, send us:
- Component drawing or sample details
- Material, thickness and joint or feature positions
- Target cycle time and production volume per shift
- Whether you need standalone, semi-automatic or fully inline operation
Frequently Asked Questions
What is an automatic screwing machine?
It feeds a screw to the driver, positions it and drives it to a preset torque automatically, so the operator only loads and unloads the component.
Why is torque control important?
Under-torque leaves a joint that works loose in service; over-torque strips the thread or cracks a plastic boss. Machine torque control makes the result repeatable and, where needed, recordable.
Can it detect a missed screw?
Yes. Screw count and torque verification are used to prevent an assembly passing with a screw missing or incorrectly seated.
Do you supply screwing fixtures separately?
Yes. We build component fixtures that present each screw position accurately to the driver, for our machines or for equipment already on your floor.
What do you need to quote?
Component drawing, screw specification and quantity per part, required torque, cycle time and whether you need standalone or inline operation.
Get a Quotation
Send your component drawing and requirement. Our engineers will recommend a configuration and quote a price.
